10
Helping People Live Better
6. Place the UV light holder back over the UV light and secure the screw for the wire harness.
7. Re-secure the cover for the UV light compartment.
8. Used UV bulbs are recyclable.
Maintenance notes:
1. Always unplug the unit when installing a lter or replacing the UV light.
2. Distinguish the front side from the back side of the lter.
3. It is recommended to wear gloves while discarding the used UV bulb and lters. Place the
used lter in a plastic bag to prevent dust from reentering the air. The UV bulb is recyclable.
TRoUbLEShooTiNg TiPS
How do I reset the lter indicator lights? I put in a new lter but the bars are
still illuminated.
After changing the lter, RESET the lter indicator by holding down RESET while the unit is ON
until the illuminated bars disappear. To reach the button, use a pin or extended paperclip.
How do I nd out what electric specications my unit needs?
Please refer to the rating label on the side of the unit. Here you will nd your units voltage, hertz,
amp and outlet requirements.
Can I clean the lter?
The black foam layer of the lter, known as the Pre-Filter, captures large dust and hair. This layer
is held on with Velcro®. Once removed, the Pre-Filter can be washed or vacuumed to maintain
efcient operation of the unit. No other layers or parts of the lter can be washed, cleaned or
otherwise reused. Please replace the lter regularly to maintain optimal
performance.
The blue light at the bottom of my unit is blinking.
This indicates that the UV light will soon burn out. Call 1-800-630-2396 to order a replacement
UV light. UV lights are like normal light bulbs and will last approximately nine to twelve months
when operated continuously.
I have an issue not listed in this manual.
Please visit www.AlenCorp.com and send us a message or call 1-800-630-2396. A customer ser-
vice representative will respond to your inquiry in a timely manner, in most cases within a couple
of hours.
Kommentare zu diesen Handbüchern